If Your Water Heater Abruptly Stops Working: What to Do
If Your Water Heater Abruptly Stops Working: What to Do
Blog Article
They are making several great points on Hot Water Heater Repair overall in the content beneath.
Several modern-day houses make use of an electrical water heater for their heating unit, as a result of its benefit as well as convenience of use. Nonetheless, just like any other electrical devices, issues might arise with its use, unexpectedly. It can be really irritating to wake up to a chilly shower instead of a hot one or having your bathroom with water that isn't warm sufficient and even also hot. Whatever the case might be, water heater troubles can be quite stressful. Fortunately, we've made a listing of feasible solutions to your water heater problems. There are a variety of variables that could cause most of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you shut off the major power supply for safety and security. Whatever the trouble is, getting it fixed must not pose too much of an issue if you comply with these actions:
Call A Specialist:
If after changing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you might need to contact a professional plumber for a specialist opinion. The trouble with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of hot water required in your home. Whatever the case may be, an expert plumber would aid solve the issue.
Examine Your Power Supply:
As fundamental as this might appear, it is extremely essential. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Replace any type of broken or worn-out fuse. Test the appliance with power after these changes to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm sufficient, you might require to check the temperature level settings on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature reset above the thermostat. This must help heat up the water. Turn the breaker back on and inspect if the issue has been resolved.
Check the Heating Element in the Water Heater:
If it's not a power trouble, after that try looking into your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any of them is defective, change that part and after that examine whether the hot water is back on.
Final thought
Hot water heater troubles are not constantly significant. Most of them are because of small issues like a blown fuse or damaged burner. Replacing the faulty components should suffice. However, if you are still incapable to address the trouble, give a call to your nearest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I have been very taken with How to Troubleshoot and Repair an Electric Water Heater and I really hope you enjoyed my piece. Sharing is caring. One never knows, you could be doing someone a favor. We love reading our article about No Hot Water — Water Heater Repair.
Plumbing SOS? Reach out! Report this page